Display And Audio; Brightness Control - Sangean DCR-200 Mode D'emploi

Display and Audio

Brightness control

The brightness of the display when the unit is in standby mode may
be adjusted. If you use the unit in the bedroom, you may prefer a lower
standby brightness level than the standard setting.
1. Press the Backlight button so that the display shows for example
"LIGHT 4".
2. Press the Backlight button one more time to change the standby
brightness level. The backlight level will change at the same time
so that you can see the effect of the change.
The default setting after a system reset is 3. Possible brightness values
range from 1 – 7.
2
GB
32