HAEGER HP-IND.002A Mode D'emploi page 10

English
3. At the end of the time a sound is made and the induction cooktop turns
itself off. The indication "OFF" (turned off) is shown on the display indicating
that the induction cooktop is in the stand-by mode.
Setting a combination of Temperature and Timer
1. Press the MENU touch button repeatedly until the Temperature (°C) and
Timer (  ) modes are shown at the same time. The indication "0:00" will
appear on the display. Using the control dial set the automatic shut off
time in the range of 1 minute to 3 hours. Turn the control dial to increase or
decrease the automatic shut off time by steps of 1 minute.
2. The set time will flash on the display for 5 seconds and then the display will
switch to the temperature. The temperature is preset to 240°C. You can
change the temperature setting using the control dial. Until the automatic
shut off of the induction cooktop, the remaining time and the set
temperature will alternate on the display. While the time is counting down,
the set temperature can be changed using the control dial as necessary.
3. At the end of the time a sound is made and the induction cooktop turns
itself off. The indication "OFF" (turned off) is shown on the display indicating
that the induction cooktop is in the stand-by mode.
Turning OFF the Induction cooktop
When you have finished using it, turn off the induction cooktop by pressing the
ON/OFF touch button. The indication "OFF" (turned off) will be shown on the
display and the induction cooktop will be in stand-by mode. Disconnect the
induction cooktop from the power socket.
Note:
For safety reasons, the induction cooktop will turn off automatically after
two hours of operation if you do not press any button or perform any
setting using the control dial.
After being turned off, the fan will run for a short time to speed up the
cooling of the cooktop. Do not disconnect the cooktop from the power
socket before the fan stops running.
8 Instructions for use