Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Manual
EN
FireWare Pandora
Specifications C-tek battery charger:
See included manual
Specifications FireWare Pandora's Box:
Weight:
Power supply:
Charging temperature:
Operating temperature:
A.
On/Off switch
B.
2 powerful LED flame luminaires
C.
1 shout box/speaker create various sound effects or sounds
a.
D.
Volume switch (0 to 10)
E.
1 connection for various smoke generators
F.
Connection panel for C-tek battery charger, battery indicator
•
1 C-tek charger
•
1 built-in battery
•
1 Electronic Control Unit
B. LED flame
a. LED flame button
C. Speaker
D. Volume switch
b. LED flame button
B. LED flame
14
FireWare Pandora
8.5 kilos
battery type: 7Ah 12V
0⁰C to 40⁰C
At 0⁰C => up to 86% battery capacity
At 25⁰C => up to 100% battery capacity
At 40⁰C => up to 103% battery capacity
a.
1 x operation switch red LED,
b.
1 x operation switch orange LED
i.
Use the push buttons on the Pandora to set the light
effects of both LED flame luminaires independently of
each other. Use various intervals or have the LED turned
on continuously. After setting the various intervals and
rhythms, activate or deactivate the light effects via the
remote control.
The sounds are operated via the remote control. There are eight different
sounds that can be combined. The volume is adjustable via the volume switch
next to the speaker on top of the Pandora.
a.
Jack XLR (power specifications) (to connect the Nimbo, Cirrus,
Stratus and Cumulus smoke generators)
b.
XLR-male-male connector (to connect the Stratus and Cumulus
smoke generator)
E. Connection options
F. Connection panel
A. On/Off switch
www.FireWare.nl
Publicité
Table des Matières
