Use Instruction; Cleaning Removable Filter Basket; Installing The Brush Attachment - Stanley POOLTEC 28800 Manuel Du Propriétaire

USE INSTRUCTION

1. Lower the Stanley Spa Vac into the water to the area requiring vacuuming,
being careful not to submerge the handle
2. Water should cover the vacuum end outlet at all times when in use (see Fig. 2)
3. Adjust the Twist Lock in the middle of the vacuum pole to desired length (see Fig. 3)
4. Press the On/Off button to turn on (see Fig. 4)
5. Slowly vacuum debris
6. Remove Stanley Spa Vac from the water and press the On/Off button to turn off
7. Always clean filter basket after each use (See Cleaning Removable Filter
Basket Instructions)

CLEANING REMOVABLE FILTER BASKET

1. Unscrew head attachment counter clockwise (see Fig. 5)
2. Remove head assembly from filter basket by pulling (see Fig.6)
3. Allow the debris to dry
4. Gently shake filter basket into garbage container
5. Return filter basket assembly into the vacuum
6. Return the filter basket assembly into the vacuum
7. Return vacuum head attachment

INSTALLING THE BRUSH ATTACHMENT

The Stanley Spa Vac brush attachment works wonders on removing dirt and
deposits from the pool or spa wall.
1. Remove brush attachment from the side of your Stanley Spa Vac (see Fig. 7)
2. Slide brush onto the vacuum head (see Fig. 8)