Technical Specifications; Simplified Eu Declaration Of Conformity - MELICONI HP EASY Mode D'emploi

Masquer les pouces Voir aussi pour HP EASY:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

For normal use, simply turn the headphones on and off, exclusively by pushing button "D" positioned on
the headphones.
NOTES: It is possible to use the headphones with a direct connection to the audio source (without the
base), by plugging the 3.5mm jack cable into AUX socket "E".
Transmission bandwidth:
Carrier frequencies:
RF output Power:
Frequency response:
Distortion:
Signal/noise ratio:
Maximum transmission distance:
Headphone charging time:
Integrated Lithium Polymer battery (headphones):
Operating time of the headphones:
Operating temperature:
If the headphones do not produce any sound or if the audio signal is disturbed or is presumed to come from
other sources, carry out the following steps:
1. Check that all the connections are correct and that the device is operating as described in this manual.
2. Turn up the volume of the audio source and make sure the "L" light on the base is lit blue.
3. Turn off the headphones with button "D", move closer to the base unit then turn the headphones on
again, checking if the green light "C" comes on.
4. If the problem persists, use the "H" switch on the base to try changing channels (A/B); Briefly press the
"D" button and make sure the base is paired correctly with the headset ("C" light green).
5. Use the "A" and "B" buttons to adjust the audio on the headset.
If you have any queries regarding HP Easy
• read this instruction manual carefully, as it will help you solve most problems.
• consult our website: www.meliconi.com
For any questions/problems, you can call our customer TECHNICAL ASSISTANCE on (+39) 02 66012766,
or write to us at info@meliconi.com

Simplified EU declaration of conformity

The manufacturer, Meliconi S.p.A., declares that the type of radio equipment marketed as HP Easy He-
adphones is compliant with Directive 2014/53/EU (RED).
The full text of the EU Declaration of Conformity is available at the following web address:
http://www.meliconi.com/doc/cuffiahpeasy
14
Use

Technical specifications

UHF 863-865 MHz
863,3 MHz - 864,5 MHz (2 canales)
<10mW e.r.p.
60 Hz – 14 KHz stereo
<1 %
≥ 70dB
100 metres (in free field)
about 2-2.5 hours
3,7V – 400mAh
about 8 hours with a fully charged battery, at medium volume
0°C-40°C
Troubleshooting
Helpline

Publicité

Table des Matières
loading

Table des Matières