Storage; Troubleshooting; Technical Data - Proficook PC-UM 1006 Mode D'emploi

CAUTION:
• Do not use a wire brush or any abrasive items.
• Do not use any acidic or abrasive detergents.
Tip
Directly after you have mixed your drink:
Fill the mixing vessel with lukewarm water to half
capacity. Use the "TURBO" button to switch on the
mixer for around 10 seconds. This will preclean the
jug.
For cleaning the outside of the machine use only a
damp washing-up cloth.
Mixer blade and screw mount, Mixing jug with
lid and cap
• Clean these components in a rinsing bath.
• Rinse with clean water.

Storage

Clean the device as described. Let the accessories
dry completely.
We recommend that you store the device in its
original packaging when it is not to be used for a
longer period.
Always store the device at a well ventilated and dry
place outside the reach of children.

Troubleshooting

Malfunc- Possible cause Remedy
tion
The The device is
device not supplied
does not with power.
function.
The safety
switch is not
closed.
Malfunc-
tion
The
device
does not
function.
Liquids
are not
mixed cor-
rectly.
Model ....................................................PC-UM 1006
Power supply: ....................... 220-240 V~ 50 / 60 Hz
Nominal power consumption:....................... 1000 W
Max. power consumption: ............................ 1200 W
Sound pressure level: ................................ 82 dB(A)
Protection class: ......................................................IΙ
Short-time operation/Pause: ..................2 / 1 minute
Net weight: ......................................approx. 4.60 kg
The right to make technical and design modifica-
tions in the course of continuous product develop-
ment remains reserved.
This device complies with all current CE directives,
such as electromagnetic compatibility and low volt-
age directive and is manufactured according to the
latest safety regulations.
Check the outlet
with a different
device.
Insert the power
plug correctly.
Check your
domestic fuse.
Check if all
components
were properly
attached.
Possible cause Remedy
The device is Contact our
defective. Service or a
specialist.
You have too Vary the quantity
much or too of the liquid.
little liquid in the
vessel.
The speed is Start with a lower
too high. speed which you
can increase
later.

Technical Data

47