Remote Control Functions - Impecca HTDS-5175BT Mode D'emploi

REMOTE CONTROL FUNCTIONS

1. Switch the unit on/off
2. Change audio/language tracks (if supported by the disc)
3. Return to the DVD title (as if the disc was just inserted)
4. Highlight and select menu items using the directional arrows
5. Enter the system setup menu
6. Switch between the CD/DVD and USB sound sources
7. Stop playback
8. Return to the root menu of the DVD
9. Go to the previous chapter or track
10. Change sound to mono (left/right/left+right). Rarely used.
11. Rewind (for song/video) or tune to a lower frequency (FM radio)
12. Zoom in on the picture (for video) or store the current station in
memory (for radio)
13. Turn the sound on/off
14. Go to the menu, or return to DVD playback it already at the menu
15. Play the video in various slow motion speeds (if supported)
16. Repeat from A to B (press to mark A, then again for B)
Press B again to resume normal playback
17. Change sound equalization (e.g. Rock, Jazz, Pop)
18. Eject any disc currently in the tray (when in DVD mode)
19. Use these numbers to enter time or chapters. Use "10+" for 10 or
higher.
20. Skip to a specific time or chapter (if supported by the disc)
21. Change camera angles (if supported by the disc)
22. Select/enable subtitles (if supported by the disc)
23. Change between DVD, Bluetooth and Radio sound sources.
24. Enable Pro Logic II playback
25. Begin or pause playback
26. Turn up volume
27. Skip to the next chapter or track
28. Turn down volume
29. Fast Forward (song/video) or tune to a higher frequency
(radio)
30. Repeat tracks (for audio) or chapters (for video)
31. Search/scan for the next tunable radio station
32. Program a tracklist
33. Press to display information about playback time/status
34. Pause and advance one frame at a time (if supported). Press play
to resume normal playback
35. Switch between NTSC and PAL video modes
11