Machine Information; Technical Specifications - VONROC S2_CD501DC Traduction De La Notice Originale

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 23
EN

2. MACHINE INFORMATION

Intended use
This cordless drill is intended for driving in and
loosening screws as well as for drilling in wood,
metal and plastic.

TECHNICAL SPECIFICATIONS

Model No.
Voltage
Chuck capacity
Torque settings
No load speed
Position 1:
Position 2:
Weight
Sound pressure level L
Sound power level L
WA
Hand-arm vibration a
(screwdriving without impact)
Hand-arm vibration a
(Drilling into metal)
Model No
Battery Type
Voltage
Capacity
Recommended charger
Weight
Model No
Charger input
Charger output
Charging time 2Ah battery
Charging time 4Ah battery
Recommended batteries
Weight
Only use the following batteries of the VONROC
VPOWER 20V battery platform. Using any other batte -
ries could cause serious injury or damage the tool.
6
S2_CD501DC
20V
13 mm
21+ Drill mode
0-400 /min
0-1500 /min
1.15 kg
89.9 dB(A), K=3dB(A)
PA
99.9 dB(A), K=3dB(A)
0.700 m/s
K=1.5 m/s
h
2
1.746 m/s
K=1.5 m/s
h,D
2
CD801AA
Lithium-Ion
20V
2.0 Ah
CD802AA
0.3 kg
CD802AA
220-240V,50Hz 0.4A
21V
2.5A
60 minutes
120 minutes
CD801AA, CD803AA
0.36 kg
CD801AA
CD803AA
The following charger of the can be used to charge
these batteries.
CD802AA
The batteries of the VONROC VPOWER 20V battery
platform are interchangeable with all the VONROC
VPOWER 20V battery platform tools.
Vibration level
The vibration emission level stated in this instruc-
tion manual has been measured in accordance
with a standardized test given in EN 62841; it may
be used to compare one tool with another and as
a preliminary assessment of exposure to vibration
when using the tool for the applications mentioned.
• Using the tool for different applications, or with
different or poorly maintained accessories, may
significantly increase the exposure level.
• The times when the tool is switched off or when
2
it is running but not actually doing the job, may
significantly reduce the exposure level.
2
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work patterns.
DESCRIPTION
The numbers in the text refer to the diagrams on
page 2.
1. Machine
2. Battery
3. Battery unlock button
4. Work light
5. On / off switch
6. Torque adjustment ring
7. Chuck
8. Gear selection switch
9. Direction switch
10. Belt hook
11. Battery LED indicators button
12. Battery LED indicators
13. Charger
14. Charger LED indicators
3. ASSEMBLY
Before any work on the power tool, remove
the battery.
20V, 2Ah Lithium-Ion
20V, 4Ah Lithium-Ion
Quick charger
WWW.VONROC.COM

Publicité

Table des Matières
loading

Table des Matières