Care & Maintenance; Replacement Parts - Ninja BL610 Manuel Du Propriétaire

Care & Maintenance
HOW TO CLEAN
CAUTION: Make sure that the motor base is
unplugged from the power source before inserting
or removing any attachment and before cleaning.
CAUTION: DO NOT immerse the motor base into
water or any other liquid.
1
Separate/remove all parts from each other.
2 Hand Washing: Wash the container, lid, and blade
assembly in warm, soapy water. When washing the
blade assembly, use a dish-washing utensil with a
handle to avoid direct hand contact with blades. Handle
blade assembly with care to avoid contact with sharp
edges. Rinse and air dry thoroughly.
Dishwasher: The container, lid and blade assembly
are all dishwasher safe. The lid and stacked blade
assembly are top rack dishwasher safe. Ensure that the
stacked blade assembly is removed from the container
before placing in the dishwasher.
WARNING: Handle the Stacked Blade Assembly,
with care when washing, as the blades are
sharp. Contact with the blades' edges can result
in laceration.
3
Wipe the motor base clean with a damp cloth.
Please call customer service if any servicing needs to
be performed on the appliance at 1-877-646-5288.

Replacement Parts

To order additional parts and accessories, please visit our website: www.ninjakitchen.com
or feel free to contact customer service: 1-877-646-5288.
HOW TO STORE
1
Store the Ninja Professional 1000 upright with the blade
®
assembly inside the container with the lid secured on
top. Do not place anything on top. Loosely wrap the
power cord around the cord storage hook in the back of
the unit.
RESETTING THE MOTOR THERMOSTAT
The Ninja Professional 1000 features a unique safety
®
system which prevents damage to the unit's motor and
drive system should you inadvertently overload your
appliance. If the appliance is being overloaded, the
motor will stop. Allow the appliance to cool for
approximately 15 minutes. To reset the appliance,
follow the resetting procedure below:
1
Unplug the appliance from the electrical outlet.
2
Remove and empty the container and ensure that no
food is jamming the Stacked Blade Assembly.
3 Allow the appliance to cool for approximately 15
minutes.
4
Re-install the container onto the base and re-plug the
appliance into the electrical outlet.
5
Proceed to use the appliance as before making sure not
to exceed the recommended maximum capacities.
www.ninjakitchen.com 14