English; Installation And Ambient Conditions - EPTA COSTAN STAGE EULNS Série Instructions Pour L'utilisateur

Modello - Modèle - Model
Modell - Modelo - Modelo
Fabbricante - Constructeur - Manufacturer
Hersteller - Fabricante - Fabricante
1. DESCRIPTION
STAGE are a fan-assisted refrigerated showcases with built-in unit for the preservation of fresh
food. Their main features and dimensions are clearly illustrated in drawings and sections 1, 2, 3,
4, 5 and 6 on pages 15, 16, 17 and 18. As for weights, packing included and excluded and packing
sizes, see table I and drawings 8 on page 19. A wide range of optional accessories is also available
for enhanced functions. To this respect, contact the authorised after-sales service only.
2. TRANSPORTATION
The cabinet is contained in a specially crated package that enables transportation by the use of
fork-lift trucks. Handle the machine on its own pallet or on a similar platform; use a fork lift truck,
either manual or electric, provided that it is adequate for handling such appliances and it has the
requisite lifting capacity (see page 19 - figs. 7 and 8 and table I). Handling is reserved for the au-
thorised after-sales service.
3. DELIVERY AND STORAGE
Prior to accepting the case from the carrier, check the conditions of the package. If it is showing
visible damage, the machine too may have suffered some consequences. If so, unpack the ma-
chine in the presence of the carrier and sign, with reservation, the delivery bill. The manufacturer
disclaims all liability for damage caused by transportation or incorrect handling during storage.
Unpacking is reserved for the authorised after-sales service. Storing temperature must be between
-25°C and +55°C, air humidity between 30% and 95%. Keep the case away from direct sunlight
and from the elements.

4. INSTALLATION AND AMBIENT CONDITIONS

The cabinet must not be installed in premises containing explosive gas substances. It
can neither be used in the open nor exposed to the rain.
Prior to connecting the cabinet, make sure that the rating plate data correspond to the characteri-
stics of the existing electrical system (see page 21 - fig. 12 tab. III). For correct operation, the ma-
chine must be placed on a level floor (see page 20 - fig. 9), far from sources of heat and/or direct
sunlight, doors, windows, fans or ventilation outlets (see page 20 - fig. 10). It must be granted a
reasonable free front area for customer service.
The room where the appliance is installed must comply with the requirements set forth
on page 20 - fig. 11 and tab. II.
5. ELECTRICAL CONNECTION
IMPORTANT: The position of the cutoff switch must enable its actuation in any EMERGENCY situa-
tion - maximum distance 3 m - (see fig. 19). Show the position of the cutoff switch to any prospec-
tive operator.
The refrigerator must be installed by professionally qualified personne and in accordance with the
instructions provided by the manufacturer and with local regulations. Incorrect installation may
cause harm to persons, animals and property. The manufacturer assumes no responsibility for such
damages.
EULNSxx
STAGE
EULLSxx
Epta Spa - Unità locale: Via degli Alpini 14 - 32020 Limana
(BL) ITALIA Tel. 0437/9681 Telefax 0437/967434
STATE REVISION
ORD.

ENGLISH

A
DATE 05.05.2020
PAGE:
UM000440
N° DOC.
37/57