Delivery; Scope Of Supply - Brink Evap WTW Manuel D'installation

1.1

Scope of supply

Before installing the Evap, check that the Evap Air Humidifier is complete and undamaged.
The following components are supplied with the Evap humidifier:
A housing fitted with 2 round connections of R200 mm.
The following components are attached to the housing:

One fibreglass (1) absorbent matrix cassette with LegioSafe water filter,

One (1) PTC electric heating element,

One (1) cord with connection adapter for SHC80 sensor (L=1m),

One (1) water supply hose (L=1m; Ø=4mm; adapter ¾" outside and
filter),

One (1) cord with coupling for cord with mains plug (L=1m),

One (1) cord fitted with a temperature sensor T3 (L=2m),

One (1) water drain hose (L = 1500mm¹; Ø = 16mm¹) with wire spring
clamp¹.
Supplied separately are:

One (1) combined humidity-temperature sensor (SHC80)

One (1) cord with coupling for cord with mains plug (230VAC; L=1m)
1.2 Evap accessories
Product description
Evap controller
Evap reducer-set D200 – D125
Evap reducer-set D200 – D150
Evap reducer-set D200 – D180
¹ See chapter 10 for version adjustment
Section 1 – Delivery
Product code
351020
351032
351033
351034
Evap
1