Technical Data - Greencut SRC350C Manuel D'utilisation

TECHNICAL DATA

Nominal input voltage
Power
Blade length
Blade Width
Engine speed
Blade speed
Cutting height (90º)
Cutting height (45º)
Throat capacity
Table size
Sound power level
Weight
NOTE: GREENCUT reserves the right to modify the technical data without prior notice.
BOX CONTENTS
1. Band saw (1 pc.)
2. Working table (1 pc.)
3. Safety nut M6 (1 pc.)
4. Hexagonal screw M6*25 (1 pc.)
5. Large flat washer D6 (1 pc.)
6. Hexagonal screw M6*12 (4 pcs.)
7. Fork wrench S=10x13 (1 pc.)
8. Hexagonal key S=3 (1 pc.)
9. Hexagonal key S=5 (1 pc.)
10. Conveyor (1 pc.)
11. Support or stop (1 set)
12. Handle (1 pc.)
• Remove the product and accessories from the box. Make sure all items are present.
• Inspect the product to ensure that it has not been broken or damaged in transit.
• Do not discard the packaging material until you have carefully inspected and satisfactorily used the product.
ATTENTION: If any part is missing or damaged, please contact the Official Technical Service. Do not
use this product without replacing the part. Using this product with damaged or missing parts can
cause serious injury to the operator.
BAND SAW
240V ~ 50 Hz
350W
1400mm
3.5-12mm
1400rpm
960m/min
80mm
40mm
195mm
313x302mm
96,4dB
18Kg
2
12
53
11
10
EN