Product Description; Pack Contents - Buffalo DA564 Mode D'emploi

• BUFFALO recommend that this appliance should be periodically
tested (at least annually) by a Competent Person. Testing
should include, but not be limited to: Visual Inspection,
Polarity Test, Earth Continuity, Insulation Continuity and
Functional Testing.
• BUFFALO recommend that this product is connected to a circuit
protected by an appropriate RCD (Residual Current Device).
Introduction
Please take a few moments to carefully read through this manual. Correct maintenance and operation of
this machine will provide the best possible performance from your BUFFALO product.

Product Description

• DA564 - Hot Dog Warmer
• DA565 - Hot Dog Warmer with 2 pins

Pack Contents

The following is included:
• Hot Dog Warmer
• Glass Warmer Jar & Lid
BUFFALO prides itself on quality and service, ensuring that at the time of packaging the contents are
supplied fully functional and free of damage.
Should you find any damage as a result of transit, please contact your BUFFALO dealer immediately.
Installation
• Remove all packaging, taking care
to dispose of all polythene bags
safely.
• Check the product for any transit
damage, do not use if there
is damage to the product or
accessories.
• Wipe bread roll spikes to remove
any transit or manufacturing
residues.
• Wash the glass jar, lid, hot dog
basket and water dish, in warm
soapy water, then dry thoroughly.
• Insert Water Dish into the Hot Dog
Warmer body and then add water
above the MIN fill indicator (200ML)
or to a capacity of 80% of the Dish.
• Place the Glass Jar over the Water
Dish, place the Hot Dog Basket in to
the Glass Jar and fit Lid to the Jar.
DA564-DA567_ML_A5_v3_20210521.indb 3 DA564-DA567_ML_A5_v3_20210521.indb 3
• DA566 - Hot Dog Warmer with 4 pins
• DA567 - Hot Dog Warmer with 6 pins
• Instruction manual
• Hot Dog Basket
Pin
UK
• Water Dish
Glass Warmer Jar
& Lid
Hot Dog Basket
Water dish
Model: DA565
3
2021/5/21 15:47 2021/5/21 15:47