Operation; Emergency Closure / Restart - Glatz Pz200 Notice De Montage Et D'utilisation

Operation

To control the functions, tap the buttons several times or keep them
pressed down.
Controls
Touch
Direct light on / off*
Indirect light on / off*
Mast light on / off*
Without function
Open / stop / close / stop sunshade
All lights on / off
All off without saving >
saved light scenario on
* The last setting will be saved
22
Press and hold
brighter / darker
brighter / darker
brighter / darker
brighter / darker
save current lighting
scenario
23

Emergency closure / Restart

The motor drive is protected against overheating and ceases to function
if there is a danger of overload, for example if several opening and closing
manoeuvres have been carried out within a short time. Proper functioning
cannot be ensured again until the motor has cooled down sufficiently
(around 5 to 10 minutes). The emergency closure function is not part of
normal use and should only be carried out in an emergency.
1.3
1.2
3.1
3.3
1
Unlock motor drive
1. Insert allen key
2. Turn allen key around 180° to the
right and decouple drive
3. Close sunshade manually
!
Manual closure should preferably
be carried out by two people on the
supporting arm at the mast.
2
Reset motor drive
1. Use the remote control to move the
motor drive into the closed position
(end position)
!
Wait until the motor switches itself
off after reaching the stop position.
3
Restart
1. Manually close sunshade completely
2. Insert allen key
3. Turn allen key around 180° to the left
and couple in the drive
4. Remove allen key
5. Check proper functioning using the
remote control
!
After restart, be sure to carry out
the function test to ensure proper
functioning.