PULOX PO-900 Mode D'emploi page 44

b. In "Input ID" interface, a cursor appears in the ID input box.The
pink letter is the selected letter in dummy keyboard. Press the
direction key to choose the letter to input and press the menu
button to input. You can input 4 letters most. Choose
press the menu button to delete a letter. After inputting, choose
, then press the menu button to begin to record data and
return to the measure interface.
c. If the inputed ID already exists, the prompt dialog box as figure 14
will appear. Choose "Yes" and click the menu button to replace
the existing ID, at the same time begin to record and return to the
measure interface; choose "No" to return to the "Input ID"
interface.
d. Every patient ID could save 24-hour data, the device could save 16
patient ID.
e. When the memory is full, the system will stop recording
automatically.
f. When the 16 groups of ID all have data, click "record" menu
again,the device will appear "No Memory" dialog box. After
deleting ID,the record can be continued.
If the device is restarted in the process of recording, the
device will lose the segment of recording data.
In the process of recording, don't allow deleting and
reviewing recording information.
B. Memory Manager setting
In the Record menu interface, move the choice bar to the "Memory
Manager" item, then press menu button to enter ID Manager
Figure 13 Input ID interface
Figure 14 Replace the existed ID dialog box
EN
, then