Use; Vacuuming Smooth Floor Areas And Carpets - Beem Mirage Power Clean Mode D'emploi

Assembling the vacuum cleaner
The vacuum cleaner is disassembled into individual parts so that the packaging can be
smaller. In a few hand movements you will have it readily assembled:
1. Unscrew the screw (b) of the lower cable attachment (15) from the tube (2).
2. Slide the tube (2) with the handle (1) into the holder of the base body (3).
3. Insert the screw (b) through the lower cable attachment (15) in the hole (a) and
screw it tight.
4. Push the lower tube (c) of the base body (3) into the floor brush (5). To remove the
floor brush (5) again, press the lever (d).
5. Insert the handheld vacuum cleaner (4) in the base body (3).
6

Use

6.1

Vacuuming smooth floor areas and carpets

Hints and tips:
Check regularly that the underside of the floor brush (5) is clean. A dirty floor brush
may scratch floor surfaces. See also chapter 7.2 "Cleaning the floor brush (5)".
The floor brush (5) can be rotated 360° and can be tilted at an angle of up to 70° –
this gives you ideal freedom of movement and mobility.
The handheld vacuum cleaner cleans all floors from smooth coverings to high-pile
carpets, and is ideal for thorough cleaning and also for short cleaning occasionally.
BEEM – Elements of Lifestyle 21 / 68