14
Dishwasher Dispenser & Detergents
RINSE AID
Rinse aid greatly improves drying and reduces
water spots and filming. It causes the water to
"sheet" off of dishes rather than form water
droplets that cling and leave spots.
The rinse aid dispenser, located next to the
detergent cup, automatically releases a measured
amount of rinse aid during the last rinse. If spotting
and poor drying are problems, increase the amount
of rinse aid dispensed by rotating the dial to a
higher number. The dial is located under the
dispenser cap.
On models with a STATUS window, LO RINSE AID
displays at the beginning and end of the cycle,
indicating that it is time to refill.
To add liquid rinse aid:
1 Turn dispenser cap 1/4 turn counterclockwise
and lift out.
2 Pour in rinse aid until liquid reaches the flat
surface marked MAX in the Rinse Aid
dispenser. Do not overfill since this can
cause oversudsing.
3 Replace cap.
4 Wipe up any spills with a damp cloth.
The dispenser holds enough for 35 to 140 washes,
depending on setting.