Royalty Line PSC-700W.76NE.116 Mode D'emploi page 20

If used in a garage, always wipe the base plate and wheels with
a dry cloth after vacuuming to clean off any sand, dirt, or pebbles
that could damage delicate floors.
VACUUMING
△ CAUTION
!
Do not use without the dust cup and filters in place.
Fine dust such as plaster dust or flour should only be vacuumed
in very small amounts
Do not use the appliance to pick up sharp hard objects, small toys,
pins, paper clips, etc. They may damage the appliance.
When vacuuming, certain carpets may generate small static
charges in the dust bag or wand, which are harmless and are not
associated with the mains electricity supply. To minimize any
effect from this, do not put your hand or insert any object into
the clear dust cup unless you have first emptied it and rinsed it
out with cold water. See the cleaning the clear dust cup section
on this Operation Manual.
Do not work with the appliance above you on the stairs.
Do not put the appliance on chairs, tables, etc.
Before vacuuming highly polished floors, such as wood or lino,
first check that the underside of the floor tool and its brushes are
free from foreign objects that could cause marking.
Do not push hard with the floor tool when vacuuming, as this
may course damage.
Do not leave the cleaner head in one place on delicate floors.
On waxed floors the movement of the cleaner head may create
an uneven luster. If this happens, wipe with a damp cloth, polish
the area with wax, and wait for it to dry.
EMPTYING THE CLEAR DUST CUP
Empty as soon as the dirt reaches the level of the MAX mark-do