Electrical Connection - REBER GOURMET SOUS-VIDE Notice D'utilisation Et Entretien

WARNING AND RULES
Read carefully all instructions before using the machine, TAKING PARTICULAR CARE OF THE SAFETY
WARNINGS at the beginning of this User's Instructions !
The manufacturer declines all responsibility should the products concerned by this manual not be used in
accordance with the instructions.
TRANSPORT – HANDLING – STORAGE
The machine is packed in a cardboard box with protection buffers and it is proper to travel by all means of
transport.
It can be put a carton on another carton for maximum 5 cartons.
The package must be stored in a dry and no-dust place.
When on pallets, handle by trans pallet or electric lifter.
UNPACKING
Open the cardboard box, take off the machine in two persons and place on a plane support.
DIRECTIVE 2002/96/CEE
Disposal of used equipment by individuals within the European Union. The presence of this symbol on the
product or on its packaging indicates that you cannot dispose of this product in the same way as your
general waste. You are directly responsible for the disposal of your used equipment and for this purpose,
you are required to deliver it to an approved collection point for the recycling of used electrical and electronic
equipment. The separate sorting, disposal and recycling of your used equipment helps preserve natural
resources and ensure that this equipment is recycled in a way that respects public health and the
environment. For more information on where to collect used equipment, please contact your town hall, your
household waste service or the store where you purchased the product.
INSTALLATION
The surface where the machine has to be installed must take into consideration the support dimensions.
Furthermore, it must be smooth, dry, strong and with an height from the ground of about 80 cm and with the
necessary space for use and maintenance all around.
The machine must be located on a flat surface, the falling must be avoided.
Environmental conditions :
Minimum temperature +10° - Max. temperature + 38°
Minimum moisture 30% - Max. moisture 80%

ELECTRICAL CONNECTION

Preliminary controls
Before connecting the machine to a socket, take care of the following:
Make sure the socket is provided with good earth connection
-
Make sure that the voltage and frequency of supply correspond to those indicated on the data plate of
-
the machine
To operate, the appliance must be connected to a power point that is always easily accessible during
-
use
Make sure about the way on how to connect the power cable to avoid the possibility of sliding and
-
tripping
It is user responsibility that the connection of the machine to the electric system is in compliance with the
-
rules in force in the country where the machine is installed, and that the installation was made by a
qualified technician.
Once all preliminary controls have been correctly done, you may connect your appliance to the mains to
-
start using it.
V. 01.2020
17