Troubleshooting
No image and voice
No voice
Snows and noises
Possible causes:
●
Power cord, antenna or input devices are not
connected;
●
The TV set is not powered on.
Solutions:
●
Check Power cord, antenna and input devices;
●
Press Power key on the remote control;
●
Press Power key on the set to power it off for 5
seconds and then re-power it on.
Possible causes:
●
The volume is too low; Muted or cancelled;
●
Incorrect sound system.
Solutions:
●
Press Volume key to turn up the volume;
●
Press Mute key to cancel Mute mode.
●
Well connect connection to the background sound;
●
Change the sound system in the menu.
Possible causes:
●
The cable is damaged or gets loose;
●
Incorrect channel preset;
●
Improper antenna positioning.
Solutions:
●
Check whether the connection of the antenna cable,
DVD and the cables is correct;
●
Reset channels or fine tune the channel;
●
Adjust the direction of the antenna.
EN-34