Mounting The Handle; Temperature Control - Linea 2000 DOMO DO935DVK Mode D'emploi

MOUNTING THE HANDLE

1. Remove the screws (5x) from the lid of the freezer with a cross-head screwdriver.
2. Mount the handle with lock on the lid of the freezer and fasten it with the 5 screws.
3. Place the cover on this handle.
USE

TEMPERATURE CONTROL

· Press the "SET" button to set the temperature. Pressing this button will raise the
temperature by one on the scale. The scale goes from "MIN" to "MAX", with MAX being
the coldest setting. This scale works in a cycle. 5 seconds after the setting you selected has
been reached, the freezer will switch to this temperature setting.
· Freezing at maximum capacity: press and hold the "SET" button until the "SUPER"
indicator light goes on. The appliance will now freeze at it maximum capacity for 52 hours.
It will then switch back to the previously set temperature. You can interrupt this by pressing
and holding the "SET" button until the "SUPER" indicator light goes out.
· To turn the appliance on or off, press and hold the "OFF" button for 3 seconds.
· The "RUNNING" indicator light goes on when the compressor is working.
· There is a temperature sensor in the freezer. The temperature indicator light flashes if the
power is interrupted or the temperature gets too high.
FREEZING AND STORING FOOD IN THE FREEZER
Use the freezer
· To store deep-frozen food.
· To make ice cubes.
· To freeze food.
Note: Ensure that the freezer door has been closed properly. Avoid opening the freezer
drawers unnecessarily.
Purchasing frozen food
· Packaging must not be damaged.
· Use by the 'use by /best before/best by/' date.
· If possible, transport deep-frozen food in an insulated bag and place quickly in the freezer.
www.domo-elektro.be
33
DO935DVK