Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
User's manual
Please read these instructions carefully before use.
INTRODUCTION
Thank you for purchasing the DMX Discontrol 192.
The DMX Discontrol 192 is a standard universal DMX 512
controller, controlling up to 192 DMX channels.
Its main features are as follows:
12 fixtures of up to 16 channels.
30 banks of 8 scenes, each for a total of 240 scenes.
6 chases, each up to 240 scenes.
8 faders adjusting the DMX output level from 0~255.
2 faders controlling chase speed and fade time.
MIDI control through MIDI interface.
Built-in microphone.
Blackout.
SCANNERS
1
7
2
8
3
9
4
10
5
11
6
12
FUNCTIONS
Front Control Panel
Scanners: Selects any or all of 12 fixtures.
1
Scenes: Stores or runs scenes.
2
3
LCD Display: 4-digit showing values and chosen settings.
Bank (up and down): 30 banks are available for selection.
4
Chases: Selects 1~6 chases.
5
6
Blackout: Disables all channel outputs.
Program: Activates the program mode. Display blinks
7
when activated.
8
MIDI/Add: Controls MIDI operation or activates the save
function.
Auto/Del: Selects Auto run in chase mode or deletes
9
scenes and/or chases.
Music/Bank Copy: Triggers sound activation in Chase
10
mode or copies a bank of scenes from one to another in
Program mode.
1
SCENE
1
2
3
4
1
2
3
4
5
9
10
11
12
13
user's manual
Blackout
Step
Program
5
6
7
8
6
7
8
Page A
14
15
16
Page B
Page
Select
11
Tap SYNC/Display: In Auto Chase mode, used to change
the rate of chase and, in Program mode, changes the
LCD display value.
12
Fade Time Slider: Adjusts the Fade Time. Fade Time is
the time it takes the DMX Discontrol 192 to completely
change from one scene to another.
13
Speed Slider: Adjusts the rate of the chase speed in Auto
Mode.
Page Select: Selects page A for channel 1 to 8, or page B
14
for channel 9 to 16.
F aders (1-8): Adjusts the output level from 0~255 or the
15
intensity from 0%~100% of each channel.
Rear Control panel
• MIDI in: Receives MIDI data.
• DMX Polarity Select: Verify the polarity of your fixture and
set the DMX Discontrol 192 to the proper polarity.
• DMX Output: Sends DMX signal to fixtures or packs.
• DC Input: Plug a DC 9~12V, 300mA minimum power supply in.
eagletone.com
EAGLETONE DMX DISCONTROL 192
www.eagletone.com
STEP/TIME
Music trigger
Auto trigger
Bank
Chase
Scene
Bank
0.1 sec
30s
Program
Midi/Add
Auto/Del
Music
Bank-copy
Tapsync
0s
10 min
Display
Blackout
SPEED
FADE TIME
Chase 1
Chase 2
Chase 3
Chase 4
Chase 5
Chase 6
1
Publicité
Table des Matières
