Vornado PCO200 Manuel D'utilisation page 14

Filter Replacement
How To Replace Your Filters
1. Unplug unit.
2. Pull the bottom part of Front Panel (A) out first, then pull top of
Front Panel (B) away from unit.
Note: The bottom of the Front Panel (B) is held in place by magnets,
you will need to pull the Front Panel hard enough to overcome the
resistance of the magnets.
±
A
14 English
3. Remove the Permanent Pre-Filter by pulling on the center tabs (A).
±
B
You may need to flex the Permanent Pre-Filter slightly to release
the tabs at the top and bottom.
±
C
C