Audio Pro LV-HUB Manuel D'utilisation page 4

CONNECTING LV-HUB TO COMPUTER
Before connecting to computer, see Mac or PC setup.
1. Connect the LV-HUB transmitter to the computer with enclosed USB cable.
2. Connect the LV-HUB to the enclosed power supply and then to 230V oulet.
2. Connect your Living speakers to 230V outlet.
Done! Play your music on your computer.
WIRELESS STATUS:
LED lights up blue on speakers and transmitters when wireless connection is established.
LED lights up red on speakers and transmitters when no wireless connection is established.
LED lights up green on speakers and transmitters when paired wireless connection is established.
Note:
- Make sure that both speakers and transmitter are using same House Code (channel 1, 2 or 3).
- If speakers are in automatic standby mode, LED is red even though wireless connection is
established. Turns blue when speakers receives audio signal.
MAC SETUP
1. Connect LV-HUB transmitter to a free USB socket.
2. Go to System Preferences, choose Sound under Hardware.
3. Click Output in menu, choose "USB Headset".
Done! You can now send audio from your computer.
PC SETUP
Please do following setup before using music playing software (for example iTunes or Spotify).
1. Connect LV-HUB transmitter to a free USB socket. Wait until software has been installed.
(See lower right hand corner, message window will open when sound device is ready to use.)
Done! You can now send audio from your computer.
For some PC computers ( i e Windows 7) you may need to perform these settings:
2. Click Start button, go to Control Panel and choose Sound & Sound devices.
3. Under playback of audio, default unit, choose "USB Headset".
Done! You can now send audio from your computer.
6
CONNECTING LV-HUB TO OTHER AUDIO SOURCES
Wirelessly to Living speakers
To optical out from TV, Apple TV, Airport Express,
mediaplayer,
To audio out from smartphone, tablet, Airport Express,
turntable (RIAA), MP3-player or CD-player
To USB port on computer
Streaming-Player or Sat/Cable Receiver.
7