Sealy Easy Twin 82001-38.74-040 Manuel Du Propriétaire page 4

safety precautions and usage statements
SAVE THESE INSTRUCTIONS.
Model No:
Twin Long — 82001-38.80-040
Queen — 82001-60.80-040
Power Ratings:
INPUT: AC 100–240V 50/60 HZ 2.0A
OUTPUT: DC 29V 1.8A
WATTS: 52.2W
Product Ratings:
The lift motors are not designed to operate continuously for more than
two [2] minutes in an eighteen [18] minute time period or approximately
10% duty cycle. Attempting to circumvent or exceed this rating will
shorten the life expectancy of the product and may void the warranty.
Weight Limits:
The recommended weight limits on the Ease™ by Sealy are:
Twin / Twin Long / Full / Queen/ Split CA King: 650 pounds
Maximum weight the bed can support per person is 250 pounds. The
head and foot sections are not designed to individually support or lift this
amount of weight. For optimal performance, enter and exit the adjustable
base with the bed in the flat or level position.
Ease™ by Sealy fits easily inside bed frames, furniture beds and platform
beds that are certified to hold a minimum of 850 pounds. If using this
adjustable base without the legs and placing directly on a bed frame or
platform bed, cross-bed supports (slats) are strongly recommended to
ensure Ease™ by Sealy maintains stability during operation.
Exceeding this weight restriction could damage the bed
and/or cause injury and will void the warranty.
2
Twin — 82001-38.74-040
Full — 82001-54.74-040
CA King Split — 82001-36.84-040
Acoustics:
In normal base operation the wheels, which allow the bed to maintain its
distance from the wall, will make contact with the steel platform supports
of the base creating a contact noise. When entering, exiting or shifting
weight on the base, this contact noise may be audible as the wheels make
contact. This is normal.
Fabric Care:
To prolong the life of your fabric, protect from direct sunlight whenever
possible. For spot cleaning, wipe area with a light damp sponge or
vacuum with a soft brush attachment to remove particles. Keep at a
minimum of 30cm (12 inches) away from direct heat sources.
For deeper cleaning, blot liquid spills with a clean dry cloth. Wipe with
a clean cloth dampened with warm water. Do not wet excessively. A soft
bristle brush may be used to remove ingrained soil. Avoid scratching by
gentle brushing. Wipe with a clean cloth dampened with warm water to
remove residues after brushing. Dry in shade away from direct heat.
If persistent marks remain visible after cleaning, seek professional advice.
FCC Compliance:
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference and (2) this device must accept any interference received,
including interference that may cause undesired operation.
To comply with the FCC RF exposure compliance requirements, no
change to the antenna or the device is permitted. Any change to the
antenna or the device could result in the device exceeding the RF
exposure requirements and void user's authority to operate the device.
Radio Frequency: 2.4 GHz