Tools Required; Materials Required; Parts Provided - GE Monogram ZGG300LC Instructions D'installation

TOOLS REQUIRED

Saber Saw
Measuring Tape
Carpenter's Square
Safety Glasses
Phillips #2 Screwdriver
Level
Pliers
Utility Knife
MATERIALS REQUIRED (not provided)
Pipe Joint Sealant
Pipe Fittings
(approved type and
resistant to LP or
natural gas)
Use stainless steel or flexible metal gas line to reach the
built-in installation location or cart model location (if natural
or whole-house LP). Do not use vinyl hose.
Installation Preparation
Drill and
Appropriate Bits
Adjustable Wrench
1/4" Driver or Wrench
Flat-Blade Screwdriver
(3/32" blade)
Appliance Dolly
Pipe Wrench
Manual Shut-Off
Valve
12

PARTS PROVIDED

Grill Cover
Rotisserie Spit Forks
9V Battery (installed
on some models)
Smoker Box
(on some models)
Cutting Board
(on some models)
ZGU122 COOKTOP PARTS
LP MODELS
See product to determine parts used.
Rotisserie Motor and Connector
Drip Pan
Bracket with Transformer and
Battery Compartment (only
on built-in models)
Rotisserie Spit Rod
3/8" Flare Tee and Two
3/8" x 3/8" Flare Hoses
(on models so equipped)