Getting Started; Basic Operation; Display Indication - Pioneer MVH-S100UI Mode D'emploi

• This product is evaluated in moderate and tropical climate condition under the Audio,
video and similar electronic apparatus - Safety requirements, IEC 60065.
If you experience problems
Should this unit fail to work properly, please contact your dealer or nearest authorized
PIONEER Service Station.

Getting Started

Basic operation

MVH-S100UI/S100UB/S100UBG/S100UBA/S100UBW/
S010UB
M.C. (multi-control) dial
MUTE
SRC (source)/OFF
DISP (display)
AUX input jack (3.5 mm stereo jack)
4
En
Display window
Detach button
BAND/
Frequently used operations
Purpose
Turn on the power*
Adjust the volume
Select a source
Change the display information
Return to the previous display/list
Return to the normal display from the
menu
USB port
* When this unit's blue/white lead is connected to the vehicle's auto-antenna relay control
terminal, the vehicle's antenna extends when this unit's source is turned on. To retract the
antenna, turn the source off.

Display indication

Indication Description
Appears when a lower tier of the menu or folder exists.
Appears when the
Appears when the local seek tuning function is set (page 12).
Appears when a traffic program is received.
Appears when the TA (traffic announcements) function is set
(page 12).
Appears when the sound retriever function is set (page 12).
Appears when the iPod control function is set (page 8).
Operation
Press SRC/OFF to turn on the power.
Press and hold SRC/OFF to turn off the
power.
Turn the M.C. dial.
Press MUTE to mute the unit. Press
MUTE again or turn the M.C. dial to
unmute.
Press SRC/OFF repeatedly.
Press DISP repeatedly.
Press BAND/ .
Press and hold BAND/ .
button is pressed.