Saeco MIRAGE MIRAGE PLUS Manuel D'installation Et D'utilisation page 19

DESCRIPTION OF CONTROLS
LIST OF THE CONTROLS AND INDICATORS (MIRAGE S) (FIG. G)
CONTROL NAME
ON/OFF and dehumidification adjustment
knob
ON indication LED
Condensation collection tank full LED
LIST OF THE CONTROLS AND INDICATORS (MIRAGE PLUS) (FIG. H)
CONTROL NAME
Dehumidification adjustment knob
ON/OFF push button / LED
Air speed selection push button /LED
Condensation collection tank full LED
Display for humidity indication
DESCRIPTION
This knob is used to turn the dehumidifier on and off, and to also
adjust the humidity level of the room.
OFF=machine turned off
= minimum dehumidification
=maximum dehumidification
This LED points out that the humidity in the air is higher than the
humidity currently set.
(see Modes of Operation)
This LED points out that the maximum level in the condensation
collection tank has been reached. The dehumidifier will stop
automatically when this occurs.
DESCRIPTION
Adjusts the humidity level of the room
= minimum dehumidification
= max. dehumidification
This push button is used to turn the dehumidifier on and off.
This push button is used to select the air flow speed through the
dehumidifier. The two fan speeds are alternately elected by
pressing this push button. The LED lights up when the maximum
speed is selected.
This LED points out that the maximum level in the condensation
collection tank has been reached. The dehumidifier will stop
automatically when this occurs.
It displays the humidity in the room (5% tolerance at 25°C)
(see Modes of Operation).
19