Installation And Handling; Disposal - Saeco MIRAGE MIRAGE PLUS Manuel D'installation Et D'utilisation

16
• Keep the packing for possible future use; in any event if the packing is disposed
of, it must be done so observing the standards in force in the country in which
the dehumidifier is installed.
• When handling and transporting the unit, it must be kept in an upright position
(fig.O); make sure that the water collection tray is empty.
• Do not use the handle situated at the back to lift the dehumidifier (Fig.P); this
handle has been designed to facilitate moving the dehumidifier while it rests on
the floor.
• Maintain the proper space around the unit as indicated in (Fig.Q) for installation;
move curtains and/or other obstacles that may interfere with smooth airflow.
• The dehumidifier must be installed on a flat and level surface that is capable of
bearing its full weight (Fig.R).
If the equipment is tilted and/or laid down, the water accumulated by the
dehumidification process may overflow, causing damage.
• The dehumidifier may be wall-mounted in an upright position (fig.S); for this
type of installation make sure that the wall is suitable to take the full weight (see
technical data). Use 2 appropriately shaped and sized dowels for this purpose
(see example in fig.T).
The manufacturer declines all implicit and explicit liabilities with regard to
damage to objects and/or injury to persons that may occur due to an
incorrect installation or use of the dehumidifier.
A dehumidifier that will no longer be used must be immediately rendered inoperable.
Unplug the unit and cut the power cord. The unit should then be handed over to an
authorised collection center for its disposal in compliance with the rules in force in the
country of installation.
V U
X= 235 mm

INSTALLATION AND HANDLING

DISPOSAL

T (not supplied)
INSTALLATION AND HANDLING - DISPOSAL
O
P
Q
R
S
Measurements
in mm
UP
Measurements
in mm