Table des Matières
Publicité
HOW TO USE ?
1- Connect your source to the speaker. (Make sure all units are switched OFF before
connection).
2- Turn ON your source
3- Make sure all your active speaker levels are down, turn ON the speaker.
4- Adjust the levels you need and Master level (20)
INSTALLATION
Never install and use this device near a source of humidity: swimming pool or wet
ground. Do not expose this equipment to rain and ensure that no object containing a
liquid, a vase for example, is placed on the device.
Do not install near a source of heat such as a heater, a hot-air vent, or quite other device
loosening of the heat, notably the amplifiers.
The Mobile series speakers can be placed on 35mm tube or speakers stands.
TECHNICAL SPECIFICATIONS
LF driver
HF driver
Max. Power
RMS Power
Frequency range
SPL Max.
High adjust.
Low adjust.
Dimensions
Net weight
Gross weight
Power supply
Battery model
Mic frequencies
Compression 1''
50Hz - 18KHz
470x390x640mm
230v AC 50/60Hz
650.000 MHz / 666.000 MHz
12'' / 31cm
500W
250W
124dB /m
+/-12dB
+/-12dB
14.95 kg
16 kg
12V/7.5A
14
Publicité
Table des Matières
