Cup Holder; Bumper Bar; Check Tire Pressure - MaxiCosi Foray Mode D'emploi

6

Cup Holder

Align cup holder with slot and slide
down into position (Figure 6).
CAUTION:
• Never hang parcels or accessories from
the cup holder as the stroller may tip
over.
• Never place more than 1-LB (0.5-kg)
in the cup holder.
7
Canopy
Press the adhesive patch to the back of
the seat. Press clips onto each side of
the seat (Figure 7).
NOTE: You can extend canopy by
unzipping the canopy zipper.
8

Bumper Bar

Press the posts of the bumper bar into
the holes on the frame until you hear
"click" (Figure 8). Pull to confirm it is
assembled securely.
To remove bumper bar press the release
buttons (Figure 8a).
9

Check Tire Pressure

Assembly
4
Ensure rear tire pressure is at 35 psi.
6
7
8
Clips
Release
Buttons
8a