MaxiCosi Foray Mode D'emploi page 5

3
Install Rear Wheels
Insert the rear wheel axle into the
frame until you hear a "click" (Figure
3). Repeat for other rear wheel. Pull to
confirm wheels are assembled securely.
NOTE: To remove rear wheel press
release button (Figure 3).
NOTE: If wheels begin to squeak, spray
lubricant on the axles.
4
Install Front Wheels
Position front wheel with pin toward the
back of the stroller. Align pin with notch
and press front wheel into the frame until
you hear a "click" (Figure 4). Repeat for
other front wheel. Pull down to confirm
wheels are assembled securely.
NOTE: To remove front wheel, rotate
wheels to side (as shown). Insert long
thin screwdriver into hole on hub to
depress pin, then pull wheel out (Figure
4).
5
Install Seat
Lower seat onto towers until you hear
each side "click" (Figure 5). Pull up to
confirm seat is assembled securely.
NOTE: Seat may face front or rear
(Figure 5a).
To remove seat,
press both
release buttons
while lifting
seat up.
Assembly
3
Pin
4
Towers
5
Release
Button
3
4a
5a