Set Ringer On/Off; Set Ringer Melody; Tone/Pulse Dialing; Setting Ringer Level - Esse-ti Fly View Operator Mode D'emploi Pour L'utilisateur

Set ringer on/off

After the "Brightness" programmation "SET 6 no ring" on the display for ten
seconds is displayed. In case you do not push any key within these ten seconds,
you have to push again the " SET/STORE" key and the "UP" or "DOWN" ones
till "SET 6 no ring" is displayed.
Press "SET/STORE" key, LCD display "ring on".
Press "UP" or "DOWN" key to select "ring on" or "ring off" to turn on or
turn off ringing sound.
Press "SET/STORE" key to confirm the setting.
Note: When you select "ring off", the phone will be ringing only
when the VIP numbers coming.

Set ringer melody

After the "Ringer on/off" programmation "7 ring_tone" on the display for ten
seconds is displayed. In case you do not push any key within these ten seconds,
you have to push again the " SET/STORE" key and the "UP" or "DOWN" ones
till "SET 7 ring_tone" is displayed.
Press "SET/STORE" key, LCD displays "ring tone 1".
Press "UP" or "DOWN" to select your favorite ringing.
Press "SET/STORE" key to confirm, there are 8 ringing melodies.

Tone/Pulse dialing

The TONE PULSE switch allows to choose the dialing mode:
•
TONE sets DTMF dialing
•
PULSE sets pulse dialing
It is recommended not to change the TONE default position.

Setting ringer level

To choose the ringer level set the base unit's RING switch to OFF (disabled) or
LO (low) or HI (high).
INSTALLATION 95