Bag Full Indicator; Filter Replacement; Replacing The Bag Filter - Nacecare HX14 Mode D'emploi

BAG FULL INDICATOR
The bag full indicator switches on to
show when the dust bag needs replacing
or when there is something blocking the
suction pipe (in this case, inspect the
pipe and remove the blockage).
REPLACING THE BAG FILTER
Remove the small door H using the
latch, as illustrated in the figure.
ENGLISH
Pull out the full dust bag, as shown in M.
To insert a new bag, proceed in reverse
order.
FILTER REPLACEMENT
Open the filter support and replace it
or clean it by tapping it gently (the filter
needs to be replaced about every 20
dust bags).
8