Watching Tv; Turning On/Off The Power; Initial Setup - Sharp AQUOS LC-32D59U Mode D'emploi

Watching TV

Turning On/Off the Power

CH
+
VOL
-
POWER
MENU
INPUT
1
POWER
POWER

Initial Setup

When you turn on the TV for the first time,
the Initial Setup will guide you through
the setup process. Perform the following
steps before you press POWER on the
remote control unit.
1. Insert the batteries into the remote
control unit. (See page 13.)
Connect the antenna cable to the TV.
2.
(See page 12.)
Plug in the AC cord to the AC outlet.
3.
(See page 10.)
T V US B
ENTER
E X IT
Press POWER on the TV, or POWER on the remote
control unit to turn the power on.
• POWER indicator : Power on,nothing;Power off,red.
Press POWER on the TV, or POWER on the remote
control unit again to turn the power off.
• The TV enters standby and the image on the screen
disappears.
INPUT
• If you are not going to use this TV for a long period of time,
be sure to remove the AC cord from the AC outlet.
2 3
• Small amount of electric power is still consumed even when
the TV is turned off.
• there is no signal input for 5 minutes, the power will turn to
standby mode automatically.
P C ME NU
RETURN
If
1. Initial Setup
The Initial Setup screen display at
•
the first use. Press ENTER to start
the initial setup.
Initial Setup Initial Setup
use. Press
Welcome to use the Wizard for
Thank you for your purchase of our
Initial Setup!!
SHARP Liquid Crystal Television.
Please press [ENTER] to start the Please press [OK] to start the
wizard. wizard.
2. Language setting
Select the OSD menu language
•
from English, Spanish, or French.
• Press
▲ / ▼
language listed on the screen, and
then press the
next step.
Initial Setup Initial Setup
Please select your Language:
< Back
Welcome Welcome
to select the desired
button to the
►
Welcome Language
English
Españpl
Franĉais
Select >Next Return Exit
23