Mains Connection; Pairing Of A Mobile Device - Renkforce M.A.R.L.I.S. Notice D'emploi

c) Mains Connection
Before plugging in the mains plug, ensure that the device voltage indicated at the subwoofer corresponds
to the available mains voltage. Do not connect the device if the indication does not correspond to the
available mains voltage. The wrong supply voltage will cause serious damage.
Be careful when handling mains cables and mains connections. Mains voltage may cause potentially fatal
electric shock.
The mains socket to which the PA speaker set is connected must be easily accessible so that the system
can be quickly separated from the mains voltage in case of an error.
The PA speaker set and all connected devices must be turned off when connecting the voltage supply.
Make sure that no cables lie around openly. Install cables professionally to prevent accidents.
Make sure that all electrical connections and connection cables between the different devices and any
extension cables comply with the regulations and the operating instructions. If an extension line is used,
ensure that it is designed for the respective load.
• Connect the mains cable low-voltage plug to the mains connection (14).
• Plug the mains plug into a wall socket.
• The POWER switch (15) is used to switch the PA speaker set on and off.
Position "O": The device is off.
Position "I": Device on.
• The ON (9) display lights up when the device is switched on.
d) Pairing of a mobile device
In Bluetooth
Before transmission between your mobile phone or Bluetooth
however, both devices must be coupled. This process is called "pairing".
• Turn the PA speaker set on with the POWER switch (15).
• Switch your mobile phone on and activate the Bluetooth
• Activate the scan for other Bluetooth
• Press and hold the BT button (5) until the display next to it starts flashing.
• When the PA speaker set was found, your Bluetooth
30
mode, the PA speaker set can be used as a playback device for Bluetooth
®
devices in the reception area at your mobile phone.
®
device and the PA speaker set is possible,
®
mode here (see instructions of the mobile phone for this).
®
device shows the Bluetooth
®
audio streaming.
®
name of the PA speaker set.
®