Thank you for choosing this Prodipe product.
Safety Information:
To ensure both your safety and the proper functioning of this product, please take the time to
read the safety instructions on the back cover.
WARNING. To avoid any possibility of electric shock, please do not remove the back of this
product. For any repair work please contact either the shop where you purchased the product or
a qualified technician.
Before using the STC-3D MK2, we recommend that you read this instruction booklet carefully.
User Information:
1. Connect your mic to your amp or your mixing deck.
Switch on your your amp/mixing deck and put the volume at minimum.
Switch on the phantom power and adjust the gain (see instructions for your mixing deck or
amp).
2. Do not cover the mic, for example, with your hand, and if you want to avoid the Larsen effect,
do not bring the mic too close to the monitors.
3. The capsule is very sensitive. Strong physical shocks can cause damage to the mic. Please
handle it with care.
4. If you want to maintain the mic's excellent quality and sensitivity, do not expose it to dust or
high temperatures.
5. The specifications in this manual are subject to change without prior notice.
Illustrations et photos non contractuelles
Actual product(s) may differ from illustrations/photographs used
Copyright © 2020 IPE Music/Prodipe
Page 11