Important; Safety Systems - Bosch MaxxiMUM MUMXX Serie Notice D'utilisation

MUMXX_en-fi.book Seite 5 Montag, 8. September 2014 3:05 15
Risk of scalding!
If processing hot liquids, steam escapes through the funnel in the lid.
Add a max. 0.75 litres of hot or frothing liquid.

Important!

Use the appliance with original accessories only.
When using the accessories, follow the enclosed operating
instructions. Attach and use only one tool or accessory.
, Explanation of the symbols on the appliance or accessory
Follow the instructions in the operating instructions.
Caution! Rotating blades.
Caution! Rotating tools.
Do not place fingers in the feed tube.

, Safety systems

Start lock-out
See "Overview of the operating positions"
table.
In pos. 1 the appliance cannot be switched
on.
The appliance can be switched
on in pos. 2–4 only:
– when the bowl has been inserted and
rotated as far as possible or
– the tool drive cover (7) has been
attached.
In Pos. 5 the appliance can only be switched
on when the tool drive cover (7) has been
attached. The blender must be screwed
in all the way.
In pos. 6 the appliance cannot be switched
on unless the mincer and adapter have been
attached correctly (see mincer operating
instructions).
Restart lock-out
If the power is interrupted, the appliance
remains switched on but the motor does
not start running again when the power
is restored. To restart the appliance, turn
the rotary switch (3) to 0/off, then switch
on the required setting.
Robert Bosch Hausgeräte GmbH
All manuals and user guides at all-guides.com
Overload protection
If the motor switches itself off while
the appliance is being used, the overload
protection feature has been activated.
Possible causes:
–
–
If a safety system is activated, see
"Troubleshooting".
Overview
The operating instructions describe several
models, see also overview of models
(Fig. ).
Please fold out the illustrated
pages.
Base unit
1 Release button
2 Multi-function arm
very large amounts of ingredients,
appliance operated too long.
"Easy Armlift" – supports the simple and
effortless operation of the multi-function
arm (see "Operating positions").
en
Fig. 
5