Changing The Dialling Mode; Flash Time - Medion LIFE P63994 Mode D'emploi

 Enter the four-digit PIN (the factory setting is 0000).
 Confirm by pressing the MENU key.
A list of the registered handsets will appear on the display.
 Use the  keys to select the desired handset and
confirm your selection with the MENU key.

14.4. Changing the dialling mode

You can adapt your telephone to the dialling mode of
your network provider under DIAL MODE. You can
choose between tone dialling and pulse dialling. The
factory setting is TONE. This is the most commonly used
dialling mode nowadays.
Pulse dialling may be necessary for some older telephone
systems.
Ask your network provider which dialling mode is
required for your connection.
 Confirm the setting DIAL MODE with MENU.
 Use the  keys to select the required dialling mode:
TONE (DTMF) or PULSE.
 Confirm by pressing the MENU key.

14.5. Flash time

You can adapt your telephone to the specifications of
your network provider or your PABX under FLASH
TIME . You can set the flash time to the following stages:
long, medium or short.
 Confirm the setting FLASH TIME with MENU.
 Use the  keys to select the required flash time:
SHORT, MEDIUM or LONG.
 Confirm by pressing the MENU key.
DE
FR
NL
EN
263 / 290