Answering The Telephone; Switching Off The Ring Tone - Medion LIFE P63994 Mode D'emploi

9.4.2. Hanging up
 Press the call key
the handset back in the base station or charging
station.
The call time will appear on the display for a few seconds.
NOTE!
If you make a call with a nearly discharged
battery, you will hear a double warning tone
every minute during the call.
End the call, place the handset in the base station and let
the battery charge.
9.5.

Answering the telephone

The assigned ring tone will sound in the event of an
incoming call and the call LED will start to flash.
 Pick up the handset to accept the call.
 If the handset is not in the base station, press the talk
key
9.5.1. Caller identity function
You can see the telephone number of a caller on the
display (if you have requested the CLIP function from your
telephone provider and if the caller also has a telephone
connection with CLIP function and has not suppressed his
telephone number).
If a caller has been saved in the phone book, the name of
the caller is shown.
9.6. Switching off the ring tone
 Hold down the
appears on the display.
252 / 290
(green).
hash key until the
(red) to end the call or place
symbol