How To Change The Position Of The Connector Panel - Panasonic AW-PH400E Mode D'emploi

How to change the position of the connector panel

The position of the connector panel can be changed from the rear panel to the bottom panel.
p Before changing the position, turn off the power.
Remove the 5 bottom panel screws, and remove the
blank panel.
Remove the 5 rear panel screws, and remove the
connector panel.
Secure the blank panel to the rear panel using the
screws.
Remove the 2 rubber feet from the blank panel.
Secure the connector panel to the bottom panel using the
screws.
Remove the blank
panel.
Remove the
connector panel.
Blank panel
Connector panel
42 (E)
Pan/Tilt Control Panel AW-RP400
Screws V 5 (bottom panel)
Screws V 5
(rear panel)
Screws V 5
(rear panel)
Remove the 2
rubber feet.
Screws V 5 (bottom panel)