Network Connection - Wireless; Network Connection - Wired - Samsung 6 Série Manuel De L'utilisateur

Network Connection - Wireless

You can connect your TV to your LAN through a standard wireless router or modem. To connect wirelessly, you must first attach a
"Samsung Wireless LAN Adapter" (WIS12ABGNX, WIS09ABGNX - sold separately) to the USB port on the side of your TV. See the
illustration below.
The LAN Port on the Wall
Samsung's Wireless LAN adapter is sold separately and is offered by select retailers and Ecommerce sites. Samsung's Wireless LAN
adapter supports the IEEE 802.11a/b/g and n communication protocols. Samsung recommends using IEEE 802.11n. When you play
video over a network connection, the video may not be played smoothly.
Most wireless network systems incorporate a security system that requires devices that access the network through an access point or
wireless router (typically a wireless IP Sharer) to transmit an encrypted security code called an access key.
If HIGH PURE THROUGHPUT (Greenfield) 802.11n mode is selected and the Encryption type is set to WEP or TKIP for your
wireless router, Samsung TVs will not support a connection in compliance with new Wi-Fi certification specifications.

Network Connection - Wired

There are two main ways to connect your TV to your network using cable, depending on your network setup. They are illustrated
below:
The Modem Port on the Wall
The LAN Port on the Wall
✎
It is not supported when the network speed is below or equal to 10Mbps.
✎
Use Cat 5 (*STP Type) cable for the connection. *STP: Shielded Twist Pair
✎
The service may not run as the service port is blocked in some network devices (AP).
Network Connection
Wireless IP sharer
(wireless router having DHCP
server)
LAN Cable
External Modem
(ADSL / VDSL / Cable TV)
Modem Cable
English - 9
Samsung Wireless LAN
Adapter
LAN Cable
LAN Cable
TV Side Panel
✎
It may differ
depending on
the model.
TV Rear Panel
LAN
TV Rear Panel
LAN