Connecting To A Common Interface Slot (Your Tv Viewing Card Slot); Changing The Input Source - Samsung 6 Série Manuel De L'utilisateur

SERVICE
SERVICE
Connector for service only.
✎
✎
NOTE
• For HDMI/DVI cable connection, you must use the
• If an HDMI to DVI cable is connected to the
• When connecting a PC to the HDMI cable, you must use the
• PC(D-Sub) and PC/DVI AUDIO IN input are not supported.
• Connecting through the HDMI cable may not be supported depending on the PC.
• The headphone jack supports only the 3 conductor tip-ring-sleeve (TRS) type.
To watch paid channels, the "CI or CI+ CARD" must be inserted.
• If you do not insert the "CI or CI+ CARD", some channels will display the
message "Scrambled Signal".
• The pairing information containing a telephone number, the "CI or CI+
CARD" ID the Host ID and other information will be displayed in about
2~3 minutes. If an error message is displayed, please contact your service
provider.
• When the configuration of channel information has finished, the message
"Updating Completed" is displayed, indicating the channel list is updated.
✎
NOTE
• You must obtain a "CI or CI+ CARD" from a local cable service
provider.
• When removing the "CI or CI+ CARD", carefully pull it out with your
hands since dropping the "CI or CI+ CARD" may cause damage to it.
• Insert the "CI or CI+ CARD" in the direction marked on the card.
• The location of the COMMON INTERFACE slot may be different depending on the model.
• "CI or CI+ CARD" is not supported in some countries and regions; check with your authorized dealer.
• If you have any problems, please contact a service provider.
• Insert the "CI or CI+ CARD" that supports the current antenna settings. The screen will be distorted or will not be seen.
Source
TV / Ext. / HDMI1/DVI / HDMI2 / AV / Component
Use to select TV or other external input sources such as DVD / Blu-ray players / cable box / STB satellite receiver connected to the TV.
✎
Press the SOURCE button. In the displaying Source list, connected inputs will be highlighted.
✎
PC(D-Sub) input is not supported. If you want to connect PC to the TV, use HDMI1/DVI input.
✎
Ext. always stays activated.
✎
Press the button.
TOOLS
• Edit Name
You can set an external input sources name you want.
– When connecting a PC to the
– When connecting a PC to the
Edit Name.
– When connecting an AV devices to the
mode under Edit Name.
• Information
You can see detailed information about the connected external device.
HDMI IN 1(DVI)
HDMI IN 1(DVI)
Connecting to a COMMON INTERFACE slot
(Your TV viewing Card Slot)

Changing the Input Source

HDMI IN 1(DVI) port with HDMI cable, you should set the TV to PC mode under Edit Name.
HDMI IN 1(DVI) port with HDMI to DVI cable, you should set the TV to DVI PC mode under
HDMI IN 1(DVI)
English - 8
port.
port, the audio does not work.
HDMI IN 1(DVI) port.
TV Side Panel
The image may differ depending on the model.
y
port with HDMI to DVI cable, you should set the TV to DVI Devices