Initial Setup - Samsung 6 Série Manuel De L'utilisateur

When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the POWERP
button. Setup is available only when the source is set to TV.
1. Menu Language: Selecting a menu language
Press the ▲ or ▼ button, then press the ENTERE button.
Select the desired OSD (On Screen Display) language.
2. Use Mode: Selecting Store Demo or Home Use
Press the ▲ or ▼ button, then press the ENTERE button.
Select the Home Use mode. Store Demo mode is for retail
environments.
✎
When pressing TV controller, the function menu screen
appears. Select the Menu(m) and press it more than 5
seconds using the controller. The Store Demo mode is
set.
✎
Cancel the Store Demo by selecting Source(
pressing it more than 5 seconds.
✎
Store Demo is only for shop display. If you select it,
several functions are not able to use. Please select Home
Use when you watch at home.
3. Network Settings: Configure network settings.
✎
If you select the Skip button, you have to set
network in the Network Settings respectively.
For more information, refer to "Connecting to the
Network" in the e-Manual.
1 Connect LAN Cable or Samsung Wireless LAN Adaptor.
Select the Next button, then press the ENTERE button.
2 Complete the network settings in accordance with your
desired way.
4. Country (Depending on the country): Selecting a
country
Press the ▲ or ▼ button, then press the ENTERE button.
Select the appropriate country.
✎
After selecting the country in the country menu, some
models may proceed with an additional option to setup
the pin number.
5. Auto Tuning (Step 1): Selecting how you watch your
TV
Let's find and store channels on your TV. Do you need to
search for channels?
• Yes, I need to.: Memorises all of the available channels
using RF cable.
• No, I don't need to.: You don't need to use Auto Tuning to
find channels.

Initial Setup

6. Auto Tuning (Step 2): Selecting a search options
Select the desired broadcasting signal and antenna source.
Press the ▲/▼/◄/► button, then press the ENTERE
button.
When setting the antenna source to Cable, a step appears
allowing you to assign numerical values (channel frequencies)
to the channels. For more information, refer to Channel →
Auto Tuning.
✎
Press the ENTERE button at any time to interrupt the
memorisation process.
✎
See e-Manual chapter "Retuning Channels > Auto
Tuning"
7. Clock: Setting the Clock Mode
) and
• Auto: Set the current time automatically.
• Manual: Allows you to manually set the current date and
time.
8. Setup Complete
Press the ENTERE button.
✎
The completed settings are displayed.
If You Want to Reset This Feature...
You should do Setup
although you did in shop.
Select System - Setup (Initial Setup). Enter your 4 digit PIN
number. The default PIN number is "0-0-0-0" (except France).
If you want to change the PIN number, use the Change PIN
function.
✎
If you forget the PIN code, press the remote control
buttons in the following sequence in Standby mode, which
resets the PIN to "0-0-0-0" (France: "1-1-1-1"):
→ → 8 → 2 → 4 →
MUTE
English - 6
→ System) again at home
(MENU
POWER
POWER (on).
(off)