Optional Functions - Hitachi EXV-2.0E2 Manuel D'installation Et De Fonctionnement

Dx-interface
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 81

OPTIONAL FUNCTIONS

11 OPTIONAL FUNCTIONS
11.1 OPTIONAL FUNCTION SELECTION THROUGH PC-ARFPE

Function Selection and Input/Output
1 Press and hold " " (menu) and " " (return) simultaneously for
at least 3 seconds during the normal mode (when unit is not
operated). The test run menu will be displayed.
2 Select "Function Selection" or "Input/Output" from the test run
menu and press "OK".
3 Select the indoor unit by pressing "
(This screen is NOT displayed when the number of indoor unit
connected with the remote control switch is 1 (one). In this case,
(4) will be displayed.)
Function Selection
4 Press "
" and select the item.
Function Selection:01-03
Item
b1
b2
b3
b4
b5
SEL.
5 Press "
" and change the setting.
Function Selection:01-03
Item
b1
b2
b3
b4
b5
SEL.
6 Press "OK" so that the confirmation screen will be displayed.
7 Select "Yes" and press "OK". The test run menu will be displayed
after the setting is confirmed. If "No" is pressed, the screen will
return to (4).
8 Press " " (return) on the test run menu to return to the normal
mode.
To set other units, press " " (return) at (4)(5) so that the screen will return to (3). (If the number of indoor unit connected with the
remote control switch is 1 (one), the screen will return to (1).)
21
PMML0293A rev.2 - 08/2016
" and press "OK".
Setting
00
01
00
/
00
00
18
00
OK
ADJ
ENT.
RTN.
Setting
00
01
00
/
01
00
18
00
ADJ
OK
ENT.
RTN.
Test Run Menu
Test Run
Function Selection
Thermistor Selection
Input/Output
Function 5
SEL.
ADJ
Function Selection
01-01
01-02
01-03
01-04
SEL.
Input/Output Setting
4 Press "
" and select the item.
Input/Output:01-03
Item
Setting
Input 1
00
Input 2
00
Output1
00
Output2
00
Output3
00
SEL.
ADJ
5 Press "
" and change the setting.
Input/Output:01-03
Item
Setting
Input 1
00
Input 2
00
Output1
01
Output2
00
Output3
00
SEL.
ADJ
Function Selection:01-03
Confirm function
selection setting?
Yes
SEL.
(Figure for Function Selection)
01
/
03
OK
ENT.
RTN.
All
OK
ENT.
RTN.
Connector
CN3 1-2
CN3 2-3
CN7 1-2
CN7 1-3
CN8 1-2
OK
ENT.
RTN.
Connector
CN3 1-2
CN3 2-3
CN7 1-2
CN7 1-3
CN8 1-2
OK
ENT.
RTN.
No
OK
ENT.
RTN.

Publicité

Table des Matières
loading

Table des Matières