Philips Avance HD3198 Mode D'emploi page 24

Masquer les pouces Voir aussi pour Avance HD3198:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Problem
The rice is scorched.
Water spills out of the
multicooker during
cooking.
I cannot get to the
desired cooking
function.
Rice smells bad after
cooking
The WiFi indicator
blinks blue and orange.
Error message (E1, E2,
E3, or E4) appears on
the display.
EN
22
Solution
The temperature control is defective. Take the appliance
to your Philips dealer or a service center authorized by
Philips.
You have not rinse the rice properly. Rinse the rice until
the water runs clear.
Make sure that you add water to the level indicated on
the scale inside the inner pot that corresponds to the
number of cups of rice used.
Touch the menu button (Menu) repeatedly to select the
desired function as shown by the indicator.
Clean the inner pot with some washing detergent and
warm water.
After cooking, make sure the steam vent cap, inner lid and
inner pot is cleaned thoroughly.
The WiFi connection has failed. Unplug the multicooker, and
plug it in after 15 seconds. Touch and hold the WiFi button
on the Multicooker until it blinks orange and repeat the WiFi
set up steps from the beginning.
There has been a power failure during cooking. Take
the appliance to your Philips dealer or a service center
authorized by Philips.

Publicité

Chapitres

Table des Matières
loading

Table des Matières