Télécharger Imprimer la page

Velleman DVBTR6 Notice D'emploi page 7

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Scan
Scan the channel in the Scan sub-menu:
• Scan Type: Manual Scan, Auto Scan, NIT Scan.
• Channel: Use the digital button on the remote control to enter
the channel number.
• Update Mode: Append (new channel will be appended to the
last channel in the list), Replace (all channels will be
replaced).
NOTE: When the ►icon appears, press the ►button on the remote control. An option box appears. Press the ▲▼button
to highlight the option and press OK to confirm. Press the ◄ button to exit without changing the option item.
Manual Scan
Select the Manual Scan, enter the proper channel number and choose
the proper bandwidth and Update Mode. Press OK. "Please Wait..."
appears in a message box. The scan starts. Press the EXIT button to exit.
After the scan the screen shows "N service found" (N = number of
scanned channels). Press the EXIT button to exit.
Auto Scan
Select the Auto Scan, choose an Update Mode and press
OK. "Scan Process" appears in a message box. The scan
starts. Press the EXIT button to exit.
The message box shows the percentage of the scan process.
TV and radio channels have been displayed in two columns.
After the scan the screen shows "N service found" (N =
number of scanned channels). Press the EXIT button to exit.
NIT Scan
Select the NIT Scan, enter the proper channel number and choose the proper bandwidth and Update Mode. Press
OK. "Please Wait..." appears in a message box. The scan starts. Press the EXIT button to exit. After the scan the
screen shows "N service found" (N = number of scanned channels). Press the EXIT button to exit.
NOTE: Do not power off immediately after the scan process.
Setup
There are 7 sub-menus:
• AV Setup
• Language Setup
• Time Setup
• Password Setup
• Factory Restore
• Booking List
• Antenna Supply
• Version
DVBTR6_v2
- 7 -
VELLEMAN

Publicité

loading