Fuse Replacement; Detaching And Attaching The Front Panel - Sony DSX-A310DAB Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Mounting the unit in the dashboard
Before installing, make sure the catches on both
sides of the bracket  are bent inwards 2 mm (
in).
1
Position the bracket  inside the
dashboard, then bend the claws outward
for a tight fit.
2
Mount the unit onto the bracket , then
attach the protection collar .
Notes
 If the catches are straight or bent outwards, the unit
will not be installed securely and may spring out.
 Make sure the 4 catches on the protection collar 
are properly engaged in the slots of the unit.

Detaching and attaching the front panel

For details, see "Detaching the Front Panel"
(page 5).
26
GB
182 mm (7
1
/
1
53 mm (2
/
in)
8
Catch
Resetting the unit
For details, see "Resetting the Unit" (page 6).
3
/
32

Fuse replacement

When replacing the fuse, be sure
to use one matching the
amperage rating stated on the
original fuse. If the fuse blows,
in)
4
check the power connection and
replace the fuse. If the fuse blows
again after replacement, there
may be an internal malfunction. In such a case,
consult your nearest Sony dealer.
Fuse (10 A)

Publicité

Table des Matières
loading

Table des Matières