Repair Service; Guarantee; Legal Regulations; Technical Features - stayer HL105B Instructions D'emploi

Disposal
It is compulsory to subject electric tools, accessories and
packaging to a recovery process that respect the
environment.
For EU countries only:
Do not throw away electric tools!
In accordance with European Directive
2012/19/UE on unserviceable electric and
electronic apparatus, after its transposition
into national law, they must be collected
separately to subject them to ecologic
recycling.
The right to amendment is reserved.

5.2. Repair service

The technical service will provide you advice regarding
questions you may have on the repair and maintenance
of your product as well as on spare parts. You may also
obtain exploded views and information on spare parts on
the internet under: info@grupostayer.com
Our team of technical advisors will be glad to guide you
regarding acquisition, application and adjustment of
products and accessories.
List of Replaceable Parts
The attached table (T1-page 16) gives checks and
actions that you can perform if your machine does not
operate correctly.
If these do not identify/remedy the problem, contact your
service agent.
!
Switch off and remove plug from mains before
investigating fault.

5.3. Guarantee

Guarantee card
Included in the documentation that accompanies this
equipment, you should find the warranty card. You
should fill out the card completely and return to vendor
with a copy of purchasing receipt or invoice and you
should receive a receipt.
Note! If you cannot find the warranty card within the
documentation, you must ask for it through your
supplier.
The warranty is limited only to manufacturing defects and
expire if pieces have been removed or manipulated or
repaired other than the manufacturer.
ENGLISH
15

6. Legal Regulations

6.1. Technical features

The values given are valid for nominal voltages [U]
230/240 V ~ 50/60 Hz - 110/120 V ~ 60Hz. For lower
voltage and models for specific countries, these values
can vary. Please observe the article number on the type
plate of your machine. The trade names of the individual
machines may vary.
We reserve the right to change related to
technical advance.
W = Rated input power
1
Q = Maximum flow
P = Maximum Pressure
2
P
= Max. Pressure Water Supply
1
IP = Protection index
T = Water temperature
1
M = weight
a = Acceleration typically evaluated in the
hw
hand/arm
L = Acoustic pressure level
A
P
L = Acoustic power level
WA
The noise level when working can exceed 95 dB (A).

6.2 EC Declaration of conformity

The undersigned: STAYER IBERICA, S.A.
With address at:
Calle Sierra de Cazorla, 7
Área Empresarial Andalucía - Sector 1
28320 PINTO (MADRID)
Tel.: +34 902 91 86 81
CERTIFIES
We declare under our sole responsibility that this product
is in conformity with the following standards or
standardized documents:
EN 60335-2-79, EN 55014-1, EN 55014-2, EN 61000-3-2, EN
according to EU Regulations
61000-3-3
2014/30/EU, 2011/65/EU.
January, 2019
15
2006/42/CE,
Ramiro de la Fuente
Director General