Skil PWRCORE 20 LH552301 Guide D'utilisation page 11

Two-Stage Brightness
Adjustment Controlled by
ON/OFF Switch (Fig.3)
Your tool is equipped with a two-stage
brightness adjustment, providing different light
intensities for your operation.
Depress the ON/OFF switch to turn on the
light: the light is in the high light mode.
Depress the ON/OFF switch again to change
to the low light mode.
Depress a third time to turn the light off.
Adjusting the Pivoting Head
(Fig.4)
The light head pivots 104° for maximum
flexibility. Manually move the head to any
position within the pivot range. Do not force the
head beyond that range.
Fig. 3
ON/OFF
Switch
Fig. 4
MAX:104 o
11